Should highly cited items be excluded in impact factor calculation? The effect of review articles on journal impact factor

Scientometrics - The use of the journal impact factor for evaluation purposes has been widely challenged because of the simplistic algorithm involved in impact factor calculation. As a result, a...     

天水地热资源开发策略

总结评价天水地热资源,依据目前世界不同的开发利用方向,分别对天水浅层地热能资源,中深层地热能资源的开发利用提出了具体方向和具体措施。     

Reaction environment self-modification on low-coordination Ni2+ octahedra atomic interface for superior electrocatalytic overall water splitting

Large scale synthesis of high-efficiency bifunctional electrocatalyst based on cost-effective and earth-abundant transition metal for overall water splitting in the alkaline environment is indispensable for renewable energy conversion. In this regard, meticulous design of active sites and probing their catalytic mechanism on both cathode and anode with different reaction environment at molecular-scale are vitally necessary. Herein, a coordination environment inheriting strategy is presented for designing low-coordination Ni²⁺ octahedra (L-Ni-8) atomic interface at a high concentration (4.6 at.%). Advanced spectroscopic techniques and theoretical calculations reveal that the self-matching electron delocalization and localization state at L-Ni-8 atomic interface enable an ideal reaction environment at both cathode and anode. To improve the efficiency of using the self-modification reaction environment at L-Ni-8, all of the structural features, including high atom economy, mass transfer, and electron transfer, are integrated together from atomic-scale to macro-scale. At high current density of 500 mA/cm², the samples synthesized at gram-scale can deliver low hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) overpotentials of 262 and 348 mV, respectively.

     

全局力平衡PDC钻头布齿优化设计

针对聚晶金刚石复合片(PDC)钻头在钻井破岩过程中因受力不平衡，导致钻井倾斜、井径扩大、钻头产生横向振动和涡动，造成钻头早期失效的问题，基于已有PDC钻头切削力学知识，构建了PDC钻头弯曲力矩及全局力平衡布齿优化设计模型，并提出模型求解方法。布齿设计实例结果表明，采用全局力平衡布齿设计方法得到的布齿结构可使PDC钻头在不同进尺条件下均能保持全局力平衡状态，尤其低进尺（小于1 mm）时的力平衡状态得到极大改善，提高了PDC钻头的钻井稳定性，对于改善钻头受力、提升钻头使用寿命、提高钻井质量与效率具有重要意义。     

耐压门C形密封圈大间隙密封性能分析与结构优化

采用有限元分析对耐压门C形密封圈密封结构进行计算分析和截面尺寸优化,计算校核典型算例下的密封性能,分析C形密封圈截面尺寸参数对其大间隙工况下密封性能的影响。结果表明:典型算例中C形密封圈结构在流体载荷增加的情况下,接触应力峰值也随之增加,并始终大于流体载荷,能够保证密封性能;大间隙密封工况下,C形密封圈截面开口半径、开口间隙和削斜高度对其密封能力影响显著。根据分析结果,优化了密封圈截面尺寸参数,优化后的密封结构在预紧压缩和大间隙工况下的密封性能均优于原始密封结构。     

课程群案例嵌入协同教学模式的探索

在课程群的教学中由于每门课程各自独立开展教学,缺乏知识的融合和衔接,导致学生运用综合知识解决问题的能力较弱。在课程群的教学中采用案例嵌入协同教学模式,将完整的工程案例嵌入到课程群各门课程的教学中,协同规划各门课程的教学任务,每门课程再围绕案例展开研究性教学。通过嵌入的工程案例衔接各门课程的知识点,帮助学生建构完整的知识体系,强化工程应用的概念；同时通过研究性教学,培养学生分析问题和解决问题的能力,两部分相结合,提高了学生运用综合知识解决复杂问题的能力。     

采煤工作面煤层注水工艺优化与应用

针对目前煤层注水存在的施工钻孔效率低、钻孔深度达不到要求、注水钻孔封孔不严、封孔器回收困难等问题，研究注水工艺的改进优化，对钻机、钻具及封孔器进行重新设计选型，形成了一整套的注水装备。该装备的应用提高了施工效率，为降低工作面粉尘危害、抑制工作面瓦斯涌出、防治煤炭自然发火等危害探索出了更加高效的途径和方法。现场应用表明，煤层注水有效地改善了工作面作业环境，为工作面实现高产高效奠定了基础。     

固溶处理对TiB2/6061复合材料硬度及耐磨性的影响

采用氟盐法制备了TiB₂质量分数为3%的原位合成TiB₂/6061复合材料,研究了固溶温度和固溶时间对复合材料硬度和耐磨性能的影响。结果表明:TiB₂颗粒弥散分布在6061铝合金基体中,明显细化6061铝合金基体晶粒。当固溶温度一定时,随固溶时间延长,复合材料的硬度和耐磨性可获得明显提高,但固溶时间在6~10 h时,复合材料的性能变化不显著。当固溶时间一定时,随固溶温度升高,复合材料硬度和耐磨性呈现先上升后下降的趋势。3wt%TiB₂/6061复合材料经530 ℃×10 h固溶处理后,硬度和耐磨性能最佳,相较于铸态硬度值提高了79.5％,磨损量减少了59.1%。固溶处理后复合材料的磨损表面犁沟变细变浅,材料脱落现象减少。